|
Post by aquanub on Aug 16, 2018 14:57:45 GMT
Hey all, Quick question for you power route guys... are there 2 clamps or 1 clamp on your router? On the product page, I'm seeing 2, on the power routes I've seen posted here there is only 1. I purchased it under the impression there was 2. Which is correct?
|
|
|
Post by Derek the Admin on Aug 16, 2018 17:03:14 GMT
There is one. Those pics (which admittedly need to be updated) show the pre-production model. We went with a thicker, single mount versus the separate, thinner, double mount. There's other positive changes like a better control box and countersunk hardware in certain locations, such as the Z plate you see there.
|
|
|
Post by polylawman on Aug 16, 2018 19:24:41 GMT
Does the Power Route use the same controls, Ardrino Uno and CNC Shield, as the Carve King? If so, can one purchase that better control box?
|
|
|
Post by Derek the Admin on Aug 16, 2018 19:36:55 GMT
It uses an uno but it has a custom breakout board, large drivers, and aircraft connectors. It wouldn't work with what is on the Carve King.
|
|
|
Post by aquanub on Aug 16, 2018 22:32:43 GMT
There is one. Those pics (which admittedly need to be updated) show the pre-production model. We went with a thicker, single mount versus the separate, thinner, double mount. There's other positive changes like a better control box and countersunk hardware in certain locations, such as the Z plate you see there. I noticed the mounting holes for the 2nd bracket is still there, I think I may adapt it for a dust shoe mount since its open
|
|
|
Post by Derek the Admin on Aug 16, 2018 23:19:49 GMT
Sounds good. The second row is mainly there for spindle mounts for 1.5 and 2.2kw spindles and their popular mounts that people sometimes use.
|
|