|
Post by beardben23 on Oct 6, 2018 19:52:24 GMT
I am attempting to make a small sign for a friend of mine and I am having an issue when creating the cut path. I will go through and select the pocket and I get an error message saying " no passes to link" I followed a millright tutorial for making and sign but I can't seem to get pass this error. Public link included. a360.co/2OLzoo4
|
|
|
Post by kevin on Oct 7, 2018 0:33:36 GMT
|
|
|
Post by ibohan on Oct 7, 2018 2:27:20 GMT
It looks like you have a 1/8" flat end mill selected for your operation, but the slots are .073" wide. Fusion 360 recognizes this and isn't creating any tool paths. Also, I would recommend using the Multiple Depths option. That will allow you to take shallow cuts instead of taking the whole depth out in a single cut.
|
|