|
laptop
Oct 15, 2018 21:45:56 GMT
via mobile
Post by captkeith on Oct 15, 2018 21:45:56 GMT
just purchased a lenova M92Z desktop intel core i7 3770S 3.1 GHZ 8G ram 500HDD 3.0 USB my question is is it suffecient enough to run my M3 CNC
|
|
|
laptop
Oct 15, 2018 21:48:11 GMT
via mobile
Post by captkeith on Oct 15, 2018 21:48:11 GMT
like to add i'm a newbie in cnc and still building my M3
|
|
|
laptop
Oct 15, 2018 21:54:26 GMT
Post by Derek the Admin on Oct 15, 2018 21:54:26 GMT
Oh yeah, I think you'll be fine.
|
|
|
laptop
Oct 15, 2018 21:54:42 GMT
Post by Hommer Woods on Oct 15, 2018 21:54:42 GMT
Far more than is required. I am running my Carve King on an old i3 Dell laptop.
|
|
|
laptop
Oct 16, 2018 18:22:10 GMT
Post by Bruce on Oct 16, 2018 18:22:10 GMT
The G-code sender software can run on just about anything including a Raspberry Pi. The CAD/CAM software like Fusion 360, has a higher resource requirement.
|
|