|
Post by beardben23 on Dec 15, 2018 16:51:44 GMT
I am still very new to this but seemingly had the basics. Had to reinstall universal g code reader and fusion. Whenever I create a cutpath im fusion it looks fine (I made sure it's in mm) and I simulate to make sure it's going to perform correctly. When I load a cutpath into the g code reader it shows all these red circles below the surface. I'm ready to pull my hair out. Please help
|
|
|
Post by beardben23 on Dec 15, 2018 17:25:14 GMT
I figured it out, whenever I was exporting the files from fusion, they weren't grbl. What a relief.
|
|
|
Post by Derek the Admin on Dec 15, 2018 20:17:08 GMT
As you’ve found out, those are invalid arcs.
|
|
|
Post by Big Man Black T-Shirt(Patrick) on Dec 18, 2018 8:31:43 GMT
As you’ve found out, those are invalid arcs. My life is an invalid arc.
|
|
|
Post by Derek the Admin on Dec 18, 2018 12:40:58 GMT
That’s pretty deep man.
|
|
|
Post by beardben23 on Dec 18, 2018 14:25:04 GMT
It was such a simple thing to overlook.
|
|
|
Post by Bruce on Dec 19, 2018 15:55:28 GMT
All ARCs MATTER!!
|
|