Scott
New Member
Posts: 3
Machine: Carve King
|
Post by Scott on Dec 27, 2018 1:53:15 GMT
Good evening, I am new here and to CNC but quite familiar with wood working/turning and metal working with a lathe. I received a Carve King as a Christmas gift and I am super excited to get it built. I want to start as with the base and work up from there. I am quite fond of the Kreg Bench and I wanted to get an opinion on using the 28” x 28” model as a dedicated base for my CK. I actually already have the bench from another project so it would be 0 cost, but I would like to get some opinions. Thanks and I look forward to chatting with you all Scott
|
|
|
Post by Hommer Woods on Dec 27, 2018 13:10:09 GMT
The only concern I would have is if that is big enough. Here is mine on a 24x48 bench. Attachments:
|
|
Scott
New Member
Posts: 3
Machine: Carve King
|
Post by Scott on Dec 27, 2018 20:53:59 GMT
The only concern I would have is if that is big enough. Here is mine on a 24x48 bench. Thank you, it looks like I would be good keeping the 28” depth but going with the 44” width
|
|
|
Post by kevin on Dec 28, 2018 1:24:58 GMT
Looks like Shephen has answered your question, but welcome to the forum and congrats on getting a great Christmas gift.
|
|