|
Post by benzy2 on Jan 27, 2019 0:55:47 GMT
Edit: Is the GRBL download the Arduino sketch? I see it (am on mobile now so can’t download) but thought that GRBL was something else. Now I’m guessing it’s the Arduino sketch to make it all talk.
Long story short, I fried both my shield and Uno due to metal debris shorting pins. All the smokes came out. So I’ve got a new shield and Uno and stepper drivers coming from Amazon. I had thought about contacting Millright but it appears to be my fault and Amazon will have it here by Monday.
so after a quick search, I couldn’t find the files to load on the Uno. I’m familiar with uploading sketches to Arduino boards. Is there anything needed for the shield itself? Any link to the Arduino sketches for the Carve King?
Thanks
|
|
|
Post by Derek the Admin on Jan 27, 2019 2:56:28 GMT
I’d have to post it for you from the office Monday, but it is floating around in the forum in a couple places. A Grbl sketch in the Arduino IDE is generic Grbl and would not be quite what you need.
|
|
|
Post by benzy2 on Jan 27, 2019 4:05:18 GMT
That would be greatly appreciated
|
|
|
Post by Derek the Admin on Jan 30, 2019 17:55:56 GMT
|
|
|
Post by benzy2 on Feb 3, 2019 4:40:38 GMT
Thank you!
|
|