|
Post by StrosBros on Feb 15, 2019 3:38:22 GMT
Hello everyone, I am using a MacOS High Sierra 10.13.6. With the power cable connected to the female adapter, when I plug the usb into the computer when I'm setting up the voltage on the drivers nothing pops up about a new usb connection. Am I missing something? Any help would be much appreciated. Thanks!
Wade W.
|
|
|
Post by ttabbal on Feb 15, 2019 5:19:12 GMT
Macs don't really do much when these are connected. No real notification. Check to see if it shows up in UGS or even just system profiler.
|
|
|
Post by Bruce on Feb 15, 2019 20:04:21 GMT
At this step you just need to measure the voltage setting on the stepper driver. Once you get the motors wired up and connected you want to make sure you have the USB Arduino software driver installed for the Mac OS.
|
|