bennett
New Member
Has anyone attached a SUCKIT DUST BOOT to a DWP611 on a carve king?
Posts: 35
|
Post by bennett on Apr 25, 2019 22:20:03 GMT
I hope I downloaded the video of how my steppers are acting. All four motors on the carve king are doing the same thing. I have changed the UNO board, CNC shield, drivers - several times, checked the crossovers, flashed the uno, updated the 1.1 grlb. I went into the UGS and increased the feed rate. I am connecting with the UGS and can control the unit but when I hit one of the keys to make it jog, the motors turn about 1/8th revolution. I am totally stumped and have been working on this for several days with no results. stepper.mp4 (1.45 MB)
|
|
|
Post by Derek the Admin on Apr 26, 2019 1:04:15 GMT
Gotcha over email.
For anyone checking the thread: FYI, you can't load the default version of grbl. It won't have our settings and certain pin changes.
|
|