|
Post by telltalehart on Jul 26, 2019 2:06:39 GMT
Hi guys! Just finishing up my carve king build. Everything is more or less assembled, and I’ve just finished the wiring. Voltages on the driver boards are dialed in. The machine jogs correctly and the steppers seem to be working great. There is, however, a weird whine. It seems to be coming from the limit switches but I am not completely sure. Is this normal or should I investigate loose wires or something?
|
|
|
Post by dadof4 on Jul 26, 2019 2:12:07 GMT
Stepper motors? They can be noisy even in the idle state.
|
|
|
Post by Derek the Admin on Jul 26, 2019 2:15:01 GMT
Dadof4 is right. The homing switches shouldn't make any noise at all.
|
|
|
Post by telltalehart on Jul 26, 2019 3:03:27 GMT
Definitely could be it. pretty hard to locate exactly. Good deal. Thanks!
|
|