|
Post by boflaherty on Nov 17, 2019 4:23:48 GMT
Hello,
Is there a max feed rate the motors can take on the Carve King?
|
|
|
Post by Derek the Admin on Nov 17, 2019 5:01:11 GMT
Yes. The control has these preprogrammed. It is 4400mm/min in Y and 3500 in X. I'd suggest keeping the max cutting feed around 3000.
|
|
|
Post by boflaherty on Nov 18, 2019 2:51:10 GMT
Yes. The control has these preprogrammed. It is 4400mm/min in Y and 3500 in X. I'd suggest keeping the max cutting feed around 3000. Thank you!
|
|