|
Post by garymkrieg on Feb 16, 2020 17:41:41 GMT
Can the Mega V control box be mounted on the right side instead of the left without having to modify the existing wiring?
Gary
|
|
|
Post by btreichel on Feb 16, 2020 18:47:09 GMT
Why don't you just try it. You really don't have to strap down anything, etc. If it seems like it would work you would probably have to reverse the drag chain supports.
|
|
|
Post by Bruce on Feb 16, 2020 22:28:07 GMT
I was thinking about how this could be done. The X axis motor cable runs to the left. And will be too short if you run to the right of the machine. Same issue with the left Y axis motor, it will be too short to run to the right also. You might be able to swap the X axis drag chain to the right (move the support plate to the right also). But the left Y axis will still be too short without some extension cable mod.
|
|
|
Post by Derek the Admin on Feb 16, 2020 23:04:53 GMT
You could probably flip it as Bruce suggested.
|
|