friolator
Full Member
Mega V 19"
Posts: 138
Machine: Other
|
Post by friolator on Mar 10, 2020 22:27:41 GMT
What are the specs on the motors for the Mega V (the ones labeled "Motor C")? In particular, I'm wondering about steps/rev, and how much current they draw.
Thanks!
|
|
|
|
Post by Bruce on Mar 12, 2020 1:41:00 GMT
NEMA 23 frame stepper motor
Total Motor Torque: 270 ounce/inch
Digital Stepper Driver Max Amperage: 4 Amps/phase @ 48Vdc
$100 = 57.288 (X-axis travel resolution, step/mm)
$101 = 57.288 (Y-axis travel resolution, step/mm)
$102 = 200.000 (Z-axis travel resolution, step/mm)
|
|
friolator
Full Member
Mega V 19"
Posts: 138
Machine: Other
|
Post by friolator on Mar 12, 2020 2:19:17 GMT
Cool. Thanks!
|
|
friolator
Full Member
Mega V 19"
Posts: 138
Machine: Other
|
Post by friolator on May 29, 2020 17:22:29 GMT
I’ve decided to set up my Mega V with a Masso G3 controller.
All wires are connected and motors are moving. But I need to dial in the settings on the controller.
I need to know the following for the X,Y, and Z axes:
Pulses per revolution
Distance per revolution
I’m wondering if anyone has this info handy
Thanks,
-perry
|
|
|
|
Post by Bruce on May 30, 2020 2:24:28 GMT
Default settings for Mega V:
$100=57.288 X steps/mm 3200 steps/rev
$101=57.288 Y steps/mm 3200 steps/rev
$102=200.000 Z steps/mm 1600 steps/rev
|
|
