Another Mega V Dust Shoe

[Bruce]

I have been messing with different designs for my Carve King and never got off the ground with anything I liked.  And then with the Mega V, I really needed something to keep the dust controlled.
I was having a hard time designing something and I finally bought a 3D printer (should have bought one earlier) and then the ideas started moving into reality.
This is a Suckit type design that clips to the top of the Z mounting plate. Some of the parts I found on Thingverse and just modified them.  

             

[cdb0ewm]

that is really nice.  Where did you find the brush you are using

[Derek the Admin]

Super nice job Bruce!

[Bruce]

Mar 19, 2020 12:41:43 GMT cdb0ewm said:

that is really nice.  Where did you find the brush you are using

Amazon:  www.amazon.com/s?k=cnc+brush+strip&crid=3INIT2LHV0GL0&sprefix=cnc+brucsh%2Caps%2C164&ref=nb_sb_ss_sc_3_10

I bought the 70mm length brush but I had to cut it down to 25mm (1") to work with this design since it has to sit so low to the work area. 

[cdb0ewm]

thks