mattgam
New Member
Posts: 3
Machine: Other
|
Post by mattgam on May 4, 2020 9:01:30 GMT
After seeing a bunch of complaints about there not being a written manual for the Mega V I went ahead and authored one. This is very much a rough draft and I want to redo most of the pictures in it, but with that said it is better than nothing. I would very much appreciate any feedback, corrections, change requests or anything else about the contents of the documentation. I'm working on a PDF version but for now its just the website. It can be accessed at: millright-megav-docs.readthedocs.io/ |
|
|
|
Post by kevin56 on May 4, 2020 13:25:59 GMT
Outstanding job! Very clear and concise KUDOS to you!
|
|
|
|
Post by Derek the Admin on May 4, 2020 21:51:37 GMT
Wow. Just wow. A big thank you and a big congratulations. I need to toss you something in recognition of this. I'll PM.
|
|
mattgam
New Member
Posts: 3
Machine: Other
|
Post by mattgam on May 4, 2020 22:50:07 GMT
Derek, I guessed on the Plasma instructions since I have a normal 35x25 with T-Plate. If you could take a peek at it when you have a moment and tell me what is wrong I'd be happy to make the edits. I do have a 4th Axis so when I get some time to actually assemble my own Mega V (spent all this time writing the manual  and have mine in pieces till I can do pictures) I will be able to make a proper write up on my own of that. millright-megav-docs.readthedocs.io/en/latest/section_19_plasma_version/index.htmlI've got a long list of topics I'll be adding when I get some more free time as well. Thanks! Matt |
|
jv
New Member
Posts: 49
|
Post by jv on May 9, 2020 13:34:44 GMT
That's impressive Mattgam. Time stamps for the tutorial videos and also adding tips from facebook groups. Awesome!
|
|
|
|
Post by jamesterm on Sept 30, 2020 2:10:59 GMT
Thanks so much... I still have yet to finish my assembly so I'll be putting this to the test tomorrow.
|
|
|
|
Post by jamesterm on Oct 1, 2020 13:00:59 GMT
It is a good thing I waited until this was written, I was on step 8h and before the instructions was thinking to use a power drill and I had the sub frame extrusions aligned in the wrong grooves. Thanks for the side view picture, and warning about the power drill. I just used a socket on a screw driver and could ensure the screws went in straight using WD-40. Worked like a champ.  Thanks again! *Here* is where we are at thus far. |
|
david
New Member
Posts: 6
|
Post by david on Oct 14, 2020 15:49:00 GMT
After seeing a bunch of complaints about there not being a written manual for the Mega V I went ahead and authored one. This is very much a rough draft and I want to redo most of the pictures in it, but with that said it is better than nothing. I would very much appreciate any feedback, corrections, change requests or anything else about the contents of the documentation. I'm working on a PDF version but for now its just the website. It can be accessed at: millright-megav-docs.readthedocs.io/ |
|
david
New Member
Posts: 6
|
Post by david on Oct 14, 2020 15:52:53 GMT
Mega V traming plate
|
|
david
New Member
Posts: 6
|
Post by david on Oct 14, 2020 15:53:14 GMT
After seeing a bunch of complaints about there not being a written manual for the Mega V I went ahead and authored one. This is very much a rough draft and I want to redo most of the pictures in it, but with that said it is better than nothing. I would very much appreciate any feedback, corrections, change requests or anything else about the contents of the documentation. I'm working on a PDF version but for now its just the website. It can be accessed at: millright-megav-docs.readthedocs.io/ |
|
david
New Member
Posts: 6
|
Post by david on Oct 14, 2020 15:55:17 GMT
Thank you for the instruction guide, I’m looking to get contact info for ordering the traming plate. I have tried to join the Facebook group, but I’m stuck at pending.
|
|
|
|
Post by mundo161 on Mar 21, 2023 0:26:34 GMT
Thanks for doing this. I tried to watch the video and it comes up as private. Is there a way to view these?
|
|
and have mine in pieces till I can do pictures) I will be able to make a proper write up on my own of that.
