|
Post by nw47978 on Jun 24, 2020 3:57:14 GMT
I'm beginning to assemble my Carve King and have only made it to the second step of the instructions, "bearing plate assembly", and I'm stuck. I'm either an idiot or didn't get the correct parts (hopefully not both!). Here are the relevant instructions that are throwing me off:
" Install the bottom two v wheels using the quarter inch, fixed spacers.... <omitted text> ...Do
the same with the top two v wheels, using the eccentric spacers instead."
The bag of hardware that was packaged with the bearing plates contains qty 8 of identical 1/4" spacers. I went through the rest of the materials and don't see any eccentric spacers (I do see another bag of smaller spacers -- 8mm I think?). Should I have 8 of the same, of 4 regular and 4 eccentric?
Thanks for any help!!!
|
|
|
Post by nw47978 on Jun 24, 2020 4:09:14 GMT
Never mind, it turns out I'm an idiot. Found 'em...
|
|