mark
New Member
Posts: 10
|
Post by mark on Aug 3, 2020 9:56:07 GMT
Aspire have availablea new laser module. has anyone got any experience with using this on a Carve King and if so which hardware option did they use. The logical one is for Open builds GRBL I am considering adding a piggback laser on my Carve King so I also need to modify the hardwareand upgrade the software. I already use Aspire for the router so getting the laser module makes sense.
|
|
|
Post by Bruce on Aug 7, 2020 3:02:30 GMT
|
|