|
Post by 321fabrication on Jun 10, 2017 0:51:48 GMT
I apologize if a thread has already been started on this topic.I have my millright fullly assembled . I'm having trouble with moving the x,y and z axis. GRBL says everything is connected. Just no movements happening. I can't hear any noise from the stepper motors. What am I missing ?
|
|
|
Post by Derek the Admin on Jun 10, 2017 3:06:49 GMT
Hey. I'd be happy to help you.
Please confirm that you have 24 volts when measuring the plus and negative terminals on the CNC shield. Also confirm that you have 0.6V on the stepper driver potentiometer. What are you pressing to command a movement? Do you by chance have homing switches? If so, is it saying "error, alarm lock" when you tell it to move?
I know that's a lot of qurstions, but that will help me help you.
|
|
|
Post by 321fabrication on Jun 10, 2017 19:49:52 GMT
Thanks . So my power wire going in to the board was loose . I reset it and everything worked flawlessly. Thank you for helping !
|
|
|
Post by Derek the Admin on Jun 11, 2017 1:15:54 GMT
Great news. Glad you are up. We looks forward to seeing what you make.
|
|