|
Post by smytty on Feb 23, 2021 21:25:23 GMT
I have a carve king, it jogs and moves no problem, get X,Y,Z zeroed, hit play and the Z axis lifts like it should and stops, no file runs, the code S2000M3 comes up in the console window. Also when I connect to the control board the yellow icon in the visualizer window disappears. thanks for the help in advance.
Thanks to the support team at Millright, they have got me up and carving again. Thanks
|
|
|
Post by Bruce on Mar 12, 2021 3:57:25 GMT
What was your fix smytty? The "S2000 M3", M3 starts the spindle and S2000 sets the speed at 2000rpm.
|
|