|
Post by activereality on Mar 7, 2021 2:51:40 GMT
Well finally got moved. Made some time to get the CK1 up and running. And got this put together today. It’s just a small tray to catch some odds and ends off my reloading bench. (Now let’s see if these pictures post from linking on my phone haha) i.imgur.com/DIFYqNF.jpgi.imgur.com/TJb3G20.png
|
|
|
Post by activereality on Mar 15, 2021 19:12:33 GMT
Noticed the Images weren't really showing.
|
|
|
Post by tagwatts1 on Mar 23, 2021 16:19:32 GMT
These look like they certainly will do the job and they look nice as well. Could you list your dimensions?
Thank You, Tagwatts1
|
|
|
Post by activereality on Mar 26, 2021 5:30:35 GMT
These look like they certainly will do the job and they look nice as well. Could you list your dimensions? Thank You, Tagwatts1 Hey there! I think the base was 6x4x..75”. Larger holes are 1.1” and smaller are .7 or .8. To get the diameters I just measured my case huge diameter (the larger one) and the comparator bodies and inserts and then added about .15” (i think) so that they would fit nicely. I think final depth on those was around .5”. The tray section..... umm. Close to the diameter extending to close to the edge? Think. I left about 1/4” from the tray edge to work piece edge. Hope that helps!
|
|