Post by resilient on Aug 5, 2021 22:01:47 GMT
Hey everyone, I have a Mega V and when I have a 12" radius circle made with a rod in the collet the right side is probably 1/4" higher than the left.
I can figure out how to tram front to back by shimming the z-rails, but I am somewhat at a loss as to how to fix the left lean of the router. There doesn't really seem to be anything that can be shimmed to add tilt and the fitting for the router is too tight to really allow any shims to fit in there to help.
Any ideas?
I can figure out how to tram front to back by shimming the z-rails, but I am somewhat at a loss as to how to fix the left lean of the router. There doesn't really seem to be anything that can be shimmed to add tilt and the fitting for the router is too tight to really allow any shims to fit in there to help.
Any ideas?