|
Post by retrosmith on Jul 17, 2017 9:31:21 GMT
Can someone with an assembled Carve King tell me the outer dimensions of the finished product? I've looked everywhere I know to look and all I can find are the working dimensions.
Mine is on order and I need to get a table put together for it. Thanks!!
|
|
|
Post by breslinmr on Jul 17, 2017 16:23:53 GMT
Haven't got mine yet but I was told it's approx 29 x 28" footprint hope that helps you
|
|
|
Post by Derek the Admin on Jul 17, 2017 16:37:47 GMT
And leave a little place for the electronics enclosure that is in the back left of the machine as well. It's about 4x4 and is positioned at the corner. You could mount is other ways, but I don't.
|
|
|
Post by retrosmith on Jul 17, 2017 18:55:45 GMT
Ok, that helps thanks guys!
|
|
|
Post by Derek the Admin on Jul 17, 2017 19:22:53 GMT
No problem.
|
|
|
Post by breslinmr on Jul 18, 2017 2:25:02 GMT
Ok, that helps thanks guys! So there won't be any problem mounting the box on the side as I don't think I'll have much room behind machine ? Just a case of moving wires around. 👍
|
|
|
Post by Derek the Admin on Jul 18, 2017 2:59:45 GMT
It's actually designed to be at the back corner of the machine on the table anyway to anchor the Y drag chain anyway.
|
|