|
Post by crawfordkevin10 on Jul 11, 2022 17:00:24 GMT
I am a bit confused on assembly of the anti racking cable assembly on the power route. I moved the router and the cable is now loose on the anti racking system and doesnt have the tension it had before, Any advice would be appreciated.
|
|
|
Post by crawfordkevin10 on Jul 19, 2022 12:17:39 GMT
Anybody build a power route? I am having no luck getting ahold of millwright through email or phone.
|
|
oldtech
Full Member
Posts: 222
Machine: Power Route
|
Post by oldtech on Jul 20, 2022 2:14:53 GMT
Detailed instructions can be found in the assembly manual.
The cable layout is fairly simple. Each of the two cables go the opposite of the frame like a lighting bolt. The cables are tied off in the front and tighten in the rear. On the front one cable goes into the top hole and other goes into the bottom. Likewise on the back.
|
|