|
|
Post by deepdivetc on Jul 23, 2017 23:04:34 GMT
I was just wanting to know if anyone is using any 1/8" Bits with the Dewalt 611. If you are could you give me suggestions on what collet to use with it to work the best.
Thanks in advance.
|
|
|
|
Post by Derek the Admin on Jul 24, 2017 1:39:47 GMT
Precise bits sells a DWP611 1/8" collet.
It's pricey.
You can get a collet adapter from us or mlcs woodworking for cheap.
|
|
|
|
Post by deepdivetc on Jul 24, 2017 5:12:38 GMT
Thank you Derek, I will look into those for sure.
|
|
|
|
Post by Hommer Woods on Jul 24, 2017 10:17:42 GMT
I purchased a 1/4 to 1/8 collet along with the 1/32 bit from Inlay Banding and they work fine with mine. inlaybanding.com/misc.html |
|
