ken47
New Member
Posts: 11
|
Post by ken47 on Nov 9, 2023 1:41:04 GMT
Just had to buy new uno board and shield. Adjusted steeper drivers 0.65 I have Carve King motors working can hear they locked in. Uploaded CK hex file on xloader my settings are all wrong type in $1=255 says millwright has locked settings and hard limit switches are active.How do I unlock them? Would appreciate the help thanks.
|
|
ken47
New Member
Posts: 11
|
Post by ken47 on Nov 9, 2023 3:01:19 GMT
Got it going have my settings set now. The only thing wrong now is one of the y motors isn’t moving. I’ll check wires may order new one.
|
|
ken47
New Member
Posts: 11
|
Post by ken47 on Nov 9, 2023 4:12:02 GMT
Is it Nema 17 1.7a for cave king?
|
|
|
|
Post by MillRightWes on Nov 9, 2023 18:07:30 GMT
We set them to 1.4 in the Carve King 2 control box.
|
|
ken47
New Member
Posts: 11
|
Post by ken47 on Nov 9, 2023 23:00:24 GMT
Is it Nema 17 1.7a for carve king? |
|
