Specs for original (Kickstarter) Mega V Standard

[friolator]

I used the wayback machine to look at the motor specs for my machine, and see that they're listed as follows:

X Axis Total Motor Torque: 270 ounce/inch
Y Axis Total Motor Torque: 540 ounce/inch
Z Axis Total Motor Torque: 270 ounce/inch
A Axis (Optional) Total Motor Torque: 270 ounce/inch
Digital Stepper Driver Max Amperage: 4 Amps/phase
X Axis Resolution: 0.013mm (0.0005”)
Y Axis Resolution: 0.013mm (0.0005”)
Z Axis Resolution: 0.005mm (0.0002”)

I want to replace these with Teknic Clearpath servos. I don't use the millright controller, I use a Masso, so this is feasible. Teknic has asked me for the following information, which I can't find on the specs list here:https://web.archive.org/web/20200804230453/https:/millrightcnc.com/product/millright-cnc-mega-v-router-bundle/

1) Pinion Diameter
2) Total Moving X Load
3) Total Moving Y Load
4) Total Moving Z Load
5) Is the 270 oz/in per motor for the current steppers a peak or RMS value?

Thanks