|
|
Post by ryanbeymer on Jul 30, 2017 7:15:59 GMT
Anyone have an idea where the UHMW piece of plastic is at?
|
|
|
|
Post by ryanbeymer on Jul 30, 2017 14:39:18 GMT
Ha, it was late, i'm asking if anyone recalls when they received their kit where in the packaging/box was the UHMW piece of plastic? A bag that it's in included in or if it was standalone would be helpful. I can't seem to find mine.
|
|
|
|
Post by bobbatt on Jul 30, 2017 15:56:02 GMT
I have my kit sitting out ready to assemble but I'm having trouble understanding what the UHMW piece of plastic is. I do have some plastic pieces for the electronic enclosure kit.
|
|
|
|
Post by Derek the Admin on Jul 30, 2017 17:18:37 GMT
It's a small piece of white plastic that is in with the bearing plates. It is rectangular. It is shown installed here. ibb.co/jXpgc5 |
|
|
|
Post by ryanbeymer on Jul 30, 2017 19:55:17 GMT
It's a small piece of white plastic that is in with the bearing plates. It is rectangular. It is shown installed here. ibb.co/jXpgc5@derek is it supposed to be in a clear bag as well like the bearing plates? |
|
|
|
Post by bobbatt on Jul 30, 2017 21:12:03 GMT
I found it in the bearing bag. It was running loose but still in the bearing parts bag.  |
|
|
|
Post by Derek the Admin on Jul 30, 2017 21:37:36 GMT
It's a small piece of white plastic that is in with the bearing plates. It is rectangular. It is shown installed here. ibb.co/jXpgc5@derek is it supposed to be in a clear bag as well like the bearing plates? Yes. It should be. Are you seeing it there? |
|
|
|
Post by ryanbeymer on Jul 30, 2017 23:46:25 GMT
@derek is it supposed to be in a clear bag as well like the bearing plates? Yes. It should be. Are you seeing it there? I've looked through all the packaging 3-4 times and haven't found it. |
|
|
|
Post by Derek the Admin on Jul 31, 2017 0:35:18 GMT
Gotcha. I'll have one on the way to you tomorrow.
I'd proceed with the build and mount the Z bottom plate later. You can go through the procedure of loosening the Z coupler and seating the screw against the UHMW screw seat later.
|
|
|
|
Post by ryanbeymer on Jul 31, 2017 3:08:49 GMT
Gotcha. I'll have one on the way to you tomorrow. I'd proceed with the build and mount the Z bottom plate later. You can go through the procedure of loosening the Z coupler and seating the screw against the UHMW screw seat later. Thanks, I'll do that! Thanks for sending that part! |
|
|
|
Post by ryanbeymer on Aug 10, 2017 16:37:54 GMT
@derek, thanks for sending the part, I got it in the mail.
|
|
|
|
Post by Derek the Admin on Aug 10, 2017 17:50:22 GMT
No problem.
|
|
