|
Post by breslinmr on Aug 11, 2017 1:48:32 GMT
Omg words can't describe and if they could I won't say them 😡😡😡 dont know what even happened was just chatting to to wife and thought I heard a different nose and went to investigate and this happened computer just feck up and paused program and just keeped running so just had to unplug. So didn't even see any error codes so frustrating. Any way shit happens will have another go lol
|
|
|
Post by Derek the Admin on Aug 11, 2017 2:11:04 GMT
Been there, done that, feel your pain. I'd see if I could get to the bottom of it. Did the computer just go to sleep mode or something?
|
|
|
Post by aforww on Aug 11, 2017 3:57:24 GMT
Pro Tip. Turn off sleep mode, standby, automatic updates. Anything that could power down or otherwise interfere. Lol.
|
|
|
Post by breslinmr on Aug 11, 2017 5:08:39 GMT
Had everything turned off just an old computer. And I was making another design so I could carve another one and on Internet flicking between them Think it just ran out off steam lol just her way off telling me I was pushing to hard lol Well tomorrow's another day
|
|
|
Post by breslinmr on Aug 11, 2017 5:10:27 GMT
And it's just started feckin hailing here in Calgary lmfao
|
|
|
Post by Derek the Admin on Aug 11, 2017 11:02:05 GMT
When it rains it pours. Or hails.
|
|
|
Post by breslinmr on Aug 11, 2017 21:00:57 GMT
Running again if this thing stops again I'll put the hammer to this computer lol
|
|
|
Post by Derek the Admin on Aug 11, 2017 21:12:04 GMT
lol. Let's hope not then. Are you using UGS platform?
|
|
|
Post by breslinmr on Aug 11, 2017 21:26:18 GMT
lol. Let's hope not then. Are you using UGS platform? Yes using ugs platform. Does that have tendency to play up sometimes
|
|
|
Post by aforww on Aug 11, 2017 22:47:40 GMT
If it does, I guess I've lucked out lol. I ran an operation for four hours the other day lol.
|
|
|
Post by breslinmr on Aug 12, 2017 0:28:06 GMT
If it does, I guess I've lucked out lol. I ran an operation for four hours the other day lol. Done another carve sign today involving the NOTORIOUS took just less that 2 hours. When collet comes will try something more intricate then lol
|
|
|
Post by aforww on Aug 12, 2017 0:31:31 GMT
If it does, I guess I've lucked out lol. I ran an operation for four hours the other day lol. Done another carve sign today involving the NOTORIOUS took just less that 2 hours. When collet comes will try something more intricate then lol That Storm Trooper took forever. Even moving pretty fast through the first two operations. First roughing was 1/4" two flute. The second was 1/8" ball, last was that tapered bit I posted that's like .4mm at the tip at a 20% step over.
|
|