|
Post by bobbatt on Aug 11, 2017 1:58:36 GMT
I had the worst time putting the 5mm nuts into the Delrin nut. Seemed like such simple deal putting a little nut into the cutout. I should have known better knowing Derek's attention to detail. The tolerances are so close that if you get the nut just barely tilted it won't go in. I took one of the 5mm bolts from the V wheels, put it through the Delrin nut and threaded the nut onto it. Then I pulled the bolt back out and I could get them into the cutout without any trouble.
|
|