|
Post by elevatedgrain716 on Aug 13, 2017 17:37:27 GMT
Hey guys just joined the forum and am in the process of just getting to the electronics in my build. I had read that the corner brackets were a sticking point and just wanted to pass along something that worked for me. Using a small 1/4" flex-head socket handle with a 9/32" socket I was able to tighten all the bolt/nuts without contorting my hand and a pair of needle nose pliers around the v rail. I can't get my picture to upload but this is a similar tool to what I used. alloy-artifacts.org/plomb-gallery-p3.htmlThanks for all the inspiration and I hope I can add to the board once I am up and running.
|
|
|
Post by aforww on Aug 13, 2017 18:18:39 GMT
Hey guys just joined the forum and am in the process of just getting to the electronics in my build. I had read that the corner brackets were a sticking point and just wanted to pass along something that worked for me. Using a small 1/4" flex-head socket handle with a 9/32" socket I was able to tighten all the bolt/nuts without contorting my hand and a pair of needle nose pliers around the v rail. I can't get my picture to upload but this is a similar tool to what I used. alloy-artifacts.org/plomb-gallery-p3.htmlThanks for all the inspiration and I hope I can add to the board once I am up and running. Welcome to the forum. And that definitely makes things a bit easier I do believe.
|
|
|
Post by breslinmr on Aug 13, 2017 20:54:28 GMT
Hey guys just joined the forum and am in the process of just getting to the electronics in my build. I had read that the corner brackets were a sticking point and just wanted to pass along something that worked for me. Using a small 1/4" flex-head socket handle with a 9/32" socket I was able to tighten all the bolt/nuts without contorting my hand and a pair of needle nose pliers around the v rail. I can't get my picture to upload but this is a similar tool to what I used. alloy-artifacts.org/plomb-gallery-p3.htmlThanks for all the inspiration and I hope I can add to the board once I am up and running. Yeah works a treat 👍 I had same problem with pictures. You have to resize them
|
|