|
|
Post by silverswarfer on Aug 18, 2017 14:29:38 GMT
Hi guys, I have a Carve King on the way and was wondering if anyone knew the overall dimensions of the machines footprint. I'm looking to set up a work area for it but haven't seen overall external dimensions anywhere. I'm guessing it's not a ton bigger than the work area of it but if someone knows dims to the nearest inch or so that would be great. Sorry if this information is listed elsewhere,I was unable to find it. Thanks!
|
|
|
|
Post by kec-10238 on Aug 18, 2017 14:49:49 GMT
The bed area is about 25 x 25 then ya have some motors that stick out a bit. I'd say you'd be plenty safe at 29" x 29" including the motors that stick out
|
|
|
|
Post by silverswarfer on Aug 18, 2017 15:04:38 GMT
The bed area is about 25 x 25 then ya have some motors that stick out a bit. I'd say you'd be plenty safe at 29" x 29" including the motors that stick out Thanks for the info! |
|
|
|
Post by txshopsales on Aug 26, 2017 13:01:17 GMT
I also have a carve king on the way and am looking for dimensions for width and depth, but also height from the base to the table. Can someone send me a picture of the legs of the machine (side view). In another post, someone mentioned 29x29 was too tight.
|
|
