|
Post by dollytom on Aug 21, 2017 0:28:04 GMT
I have a carve king and after more than a month's time of setting it up my laser connection won't work.
My router does not jog, instead a running sound is produced. Instead of jogging when I press X+ or X-, it produces a running sound.
Any suggestion from some friendly soul will be eagerly accepted.
Thank you.
|
|
|
Post by aforww on Aug 21, 2017 0:35:25 GMT
I have a carve king and after more than a month's time of setting it up my laser connection won't work. My router does not jog, instead a running sound is produced. Instead of jogging when I press X+ or X-, it produces a running sound. Any suggestion from some friendly soul will be eagerly accepted. Thank you. For jogging, double check your voltages. As for the laser, what commands are you giving it to turn on? Should be M3 and something like S12000? Derek will have to clarify the intensity value range.
|
|
|
Post by Derek the Admin on Aug 21, 2017 0:36:19 GMT
Have you tried the things I last suggested in our email conversation?
|
|