|
Post by breslinmr on Aug 22, 2017 23:24:36 GMT
little bit off a clean up with the dremel and a bit of varnish. I think it will look good enough 😬
|
|
|
Post by aforww on Aug 22, 2017 23:54:46 GMT
little bit off a clean up with the dremel and a bit of varnish. I think it will look good enough 😬 View AttachmentExcellent. Going to varnish as is or give it some color?
|
|
|
Post by breslinmr on Aug 23, 2017 0:56:48 GMT
little bit off a clean up with the dremel and a bit of varnish. I think it will look good enough 😬 Excellent. Going to varnish as is or give it some color? Frightened to put Color as I made a mess off last one any recommendations
|
|
|
Post by kevin on Aug 23, 2017 1:37:28 GMT
Great work. I love the fine detail.
|
|
|
Post by aforww on Aug 23, 2017 1:45:04 GMT
Excellent. Going to varnish as is or give it some color? Frightened to put Color as I made a mess off last one any recommendations Was it pine? Woods like pine, poplar, cedar have very inconsistent grain structure and can be very blotchy when stained. Use a pre-stain on these woods to make for a more uniform appearance. The problem is magnified with the 3D engraving. You can also use dewaxed shellac. The goal is to pre-fill those areas that want to soak up stain like a sponge.
|
|
|
Post by breslinmr on Aug 23, 2017 1:53:21 GMT
Frightened to put Color as I made a mess off last one any recommendations Was it pine? Woods like pine, poplar, cedar have very inconsistent grain structure and can be very blotchy when stained. Use a pre-stain on these woods to make for a more uniform appearance. The problem is magnified with the 3D engraving. You can also use dewaxed shellac. The goal is to pre-fill those areas that want to soak up stain like a sponge. Yeah pine I did use oak for a last super carving I'm doing as well. Thanks for the info
|
|
|
Post by aforww on Aug 23, 2017 1:55:08 GMT
Not a problem. FYI, you can dewaxed shellac at big box stores. Marketed as Zinsser Seal-coat.
|
|
|
Post by breslinmr on Aug 23, 2017 1:58:48 GMT
Will take a look tomorrow thanks
|
|
|
Post by Derek the Admin on Aug 23, 2017 2:00:57 GMT
Looks really good. Aforww gave really good advice on the staining.
I'd love to see the finished product with the hands on it.
|
|
|
Post by breslinmr on Aug 23, 2017 2:37:42 GMT
Looks really good. Aforww gave really good advice on the staining. I'd love to see the finished product with the hands on it. Going to look for some tomorrow 👍
|
|