|
Post by Derek the Admin on Aug 25, 2017 14:59:33 GMT
This was more of a demo video than anything. This is 2mm deep in aluminum with a 1/4" end mill at 1600 mm/min doing using the adaptive clearing strategy in Fusion 360. Look at the size of these chips. http://instagram.com/p/BYOImOjHq65
|
|
|
Post by aforww on Aug 25, 2017 16:21:59 GMT
This was more of a demo video than anything. This is 2mm deep in aluminum with a 1/4" end mill at 1600 mm/min doing using the adaptive clearing strategy in Fusion 360. Look at the size of these chips. http://instagr.am/p/BYOImOjHq65 Ripping it.
|
|