Tox
New Member
Posts: 3 
|
Post by Tox on Aug 26, 2017 5:24:46 GMT
Ordered an M3 a little while ago! Pretty stoked. Hopefully it can handle what I plan on putting it through haha I have high hopes for this machine. Can't wait for it to get here and start on the (dreaded) build!
|
|
|
|
Post by Derek the Admin on Aug 26, 2017 11:19:30 GMT
Thanks for the order and welcome to the community.
What do you have planned for it?
|
|
|
|
Post by aforww on Aug 26, 2017 12:31:28 GMT
Welcome Tox. Glad to have you aboard!
|
|
Tox
New Member
Posts: 3
|
Post by Tox on Aug 26, 2017 21:04:12 GMT
Thanks for the order and welcome to the community. What do you have planned for it? I plan on making Butterfly knife trainers out of aluminum and brass(similar to squidindustries.co/wp-content/uploads/2017/08/4th-510x510.jpg). Aluminum handles and brass "blades". I expect it will handle the task, I'll just have to hone in the accuracy. |
|
|
|
Post by Derek the Admin on Aug 26, 2017 22:18:09 GMT
Ya. You'll be able to do that. There are a lot of customers doing aluminum and brass on an M3. With the appropriate settings and some tuning it'll run well in it.
|
|
Tox
New Member
Posts: 3
|
Post by Tox on Aug 27, 2017 0:05:24 GMT
Ya. You'll be able to do that. There are a lot of customers doing aluminum and brass on an M3. With the appropriate settings and some tuning it'll run well in it. I plan on documenting my development and will try to keep you updated on my progress. Looking forward to that tracking number  |
|
