|
Post by Derek the Admin on Aug 28, 2017 14:42:12 GMT
This is just a basic CAD/CAM introduction to help you get going with Fusion 360. I know that people have been wanting videos for a while and I'm just starting to find the time to put some things out.
|
|
|
Post by aforww on Aug 28, 2017 19:06:54 GMT
Let me know which topics you want to do and I'll try to get some out as well
|
|
|
Post by jreimers on Aug 28, 2017 19:13:20 GMT
Importing and OBJ into Fusion and getting it ready to cut. For that matter DXF's as well. I also think we need a software thread or/and tutorials on how to convert a B&W image into a file that can be relief carved. Setting up an XBox 360 Controller. Want me to go on?
|
|
|
Post by Derek the Admin on Aug 28, 2017 20:31:05 GMT
We'll see what we can do jreimers.
Thanks for being willing to help Aforww! The DXF import would be a good one.
|
|
|
Post by aforww on Aug 28, 2017 22:37:59 GMT
Lol well, I had a list and free time until about 20 minutes ago. I'm being sent to Houston to help with recovery and rescue. So will be out of the loop. Again. But when I get back I'll do what I can to help.
|
|
|
Post by kevin on Aug 29, 2017 1:16:34 GMT
Lol well, I had a list and free time until about 20 minutes ago. I'm being sent to Houston to help with recovery and rescue. So will be out of the loop. Again. But when I get back I'll do what I can to help. It looks like those poor folks need all the help they can get, be careful out there.
|
|
|
Post by Derek the Admin on Aug 29, 2017 11:21:10 GMT
Yes, good luck to you.
|
|