|
Post by dlinderm on Aug 29, 2017 21:53:43 GMT
I'm sure you guys have a quick solution for this. Only one of my Y steppers is moving. I verified I'm cloning the y axis to the A port on the shield with a pair of jumpers. I also tried the spare driver. Have to be missing something obvious.
But, I am at the step where UGS talked to the machine and I heard the king come to life. What an amazing feeling.
Thanks all
-dave
|
|
|
Post by dlinderm on Aug 29, 2017 21:58:50 GMT
Ok, never mind, I think...
I powered down, moved the couplers several revolutions by hand, powered back up and now they work in tandem.
Could that mean a binding issue of some sort?
|
|
|
Post by Derek the Admin on Aug 29, 2017 22:31:32 GMT
That may have been. If the gantry was cocked it's possible I suppose.
|
|
|
Post by aforww on Aug 30, 2017 2:54:45 GMT
Not having the CK I can't say for sure. However, from a mechanical standpoint it is probably binding. I'd unplug the steppers and move the gantry it's full range of motion and note any binding along the axis.
|
|