|
|
Post by bobbatt on Sept 5, 2017 1:22:20 GMT
Can I use the spindle mount for the M3 on the Carve King? I tried it today but was only able to use two of the bolt holes but not all four.
|
|
|
|
Post by Derek the Admin on Sept 5, 2017 3:52:26 GMT
You can, but we've been sending a different version of the Z plate depending on whether it was ordered with the router mount or with the spindle mount. I think maybe with your situation that a regular (non-spindle) Z plate got sent out. We could swap it out if you'd like.
Alternatively, you could mod it there. Let me know how you'd like to handle it.
|
|
|
|
Post by bobbatt on Sept 5, 2017 4:10:56 GMT
Would I just drill two new holes? If so, I'll just do that.
|
|
|
|
Post by Derek the Admin on Sept 5, 2017 17:42:38 GMT
Yes, just mark the holes from the spindle mount onto the z plate. A hole needs to be made 5mm closer to the other set of slots, as you'll see when you mark it.
|
|
