|
Post by haplo181 on Sept 15, 2017 17:21:36 GMT
We just got out carve king setup and didn't have time before the hurricane to try it out really. Posting my first cut, which I need to work on the feed rate and speed some but otherwise not bad at all. It was cut out of 3mm thick overall, 5 layers carbon fiber.
|
|
|
First Cut
Sept 15, 2017 23:05:13 GMT
via mobile
Post by Derek the Admin on Sept 15, 2017 23:05:13 GMT
That looks great. I'll share that on social media if you don't mind. People always like to see carbon fiber work.
|
|
|
Post by kevin on Sept 16, 2017 1:07:43 GMT
Congrats on getting your Carve King up and running, and a great first cut in carbon fiber no less.
|
|
|
Post by Bruce on Sept 16, 2017 4:07:57 GMT
Congrats making it through the storm and getting the Carve King going.
|
|
|
Post by aforww on Sept 16, 2017 14:07:34 GMT
Did you use a burr or an actual cutter?
|
|
|
Post by haplo181 on Sept 17, 2017 12:06:01 GMT
I used a 1/8 inch diamond end mill for the cuts.
|
|
|
Post by aforww on Sept 17, 2017 14:35:44 GMT
I used a 1/8 inch diamond end mill for the cuts. Very good. CF will chew up some endmill with a quickness lol.
|
|