|
Post by tcaros on Oct 7, 2017 19:11:04 GMT
I am installing the z axis homing switch on my M3 and notice that the holes on the plate and the switch don't line up. They are opposite. What am I doing wrong? Am I overlooking something. Thank you so much in advance for the help!
|
|
|
Post by Derek the Admin on Oct 8, 2017 0:20:30 GMT
How are you trying to put the switch on? It should be on the back of the x plate at about a 30 degree angle or so.
|
|
|
Post by tcaros on Oct 8, 2017 5:45:50 GMT
How are you trying to put the switch on? It should be on the back of the x plate at about a 30 degree angle or so. Thanks for the proper angle! That now makes sense. From the angle of the pic in the build guide, it looked like it was supposed to be straight up.
|
|
|
Post by Derek the Admin on Oct 8, 2017 12:18:34 GMT
Glad that helps. Side note, I edited my reply. I said Z plate but meant X plate.
|
|