|
|
Post by mrsamdk on Oct 15, 2017 20:00:20 GMT
I just noticed that the power cable on the AC/DC Adapter is US (I think?), so it won't fit with the power socket here in Denmark.
Would I need to get a new AC/DC Adapter or would you be able to point me in the direction of some converter stick - if that exists?
I have a cable that fits with my power socket and fits in the AC/DC Adapter, however im not sure if that will work? On the cable it says: 10A 250v¨
|
|
|
|
Post by Bruce on Oct 16, 2017 3:15:19 GMT
The power supply is 100-240VAC at 60HZ-50HZ. So I think all you need is the plug adaptor to fit your power outlet for your location. Maybe oliverc has some guidence. He's in France. |
|
|
|
Post by mrsamdk on Oct 16, 2017 9:15:25 GMT
The cable I have is from my computer screen. It fits with the adapter and I tried to plug it in - and it seems to power on the adapter -> blue "turned on" light indicator on the adapter atleast appears. Would it be safe for me to plug the adapter into the CNC shield? I guess my worry was just whether my cable - even working - could deliver too much volt or something like that, in case it wasn't really compatible (I don't know anything about electrics : ) Attachments:
|
|
|
|
Post by aforww on Oct 16, 2017 12:01:11 GMT
Will be fine. The cord just carries the juice. The brick does all the work.
|
|
|
|
Post by oliverc on Oct 16, 2017 12:47:36 GMT
Yes this will work. As the converter is 'dual' voltage (110-220V), no problem.
You have the right power cord as it fit in the converter.
You can connect everything now !
Enjoy your new tools 😉
|
|
